i have 850 1996 and i had pretty much similar problem codes were:
"P0133 O2 SENSOR CIRCUIT SLOW RESPONSE (BANK1 SENSOR1)" ,so
my mechanic assumed that the problem was in the nearest sensor to the engine -logically right ,BUT, wrong!!! we lifted car up and checked sensors (2 of them) front looked just like new(closer to the engine) but the rear one on the exost pipe looked really old ,before that we checked i-net for new sensors.cheapest we could find is 150$ so not really cheap.so we pulled rear old one out and JUST CLEANED THAT WITH WD40 (RUST REMOVER)-the only thing we had by the hand that time with hope it will help -and miricle IT HELPED!!!
As i can see your error bit different but it still can work just check it visually if its really darken or corrosive,clean that off MAKE SURE YOU ARE NOT USING ANY ANY TYPE OF SANDPAPER OTHERWISE YOU SCREWED!!! just tender cloth with any type of cleaner : wd40, gasoline ,spirit,aceton,so on.
good luck any questions feel free to contact me :woorst@hotmail.com
|