Does the second transmitter operate the doorlocks correctly after you finish reprogramming? Sounds like you have the proceedure correct. Can you straighten out the problem with the original transmitter and the engine starts normally? Here's the programming proceedure from the service manual just for reference:
-----RECEIVER PROGRAMMING----
--Transmitter Replacement--
If transmitter is replaced, unit may need reprogramming. It
is necessary that receiver be programmed with each key code. To
reprogram receiver, turn ignition switch to position I or II 5 times
within 10 seconds. Leave ignition on at fifth turn. Press either LOCK
or UNLOCK button on transmitter once within 30 seconds. If transmitter
is provided with different key codes, programming of each unique code
must be accomplished within 30 seconds. Turn ignition off. Verify
operation of each individual transmitter. (i.e. do the doorlocks work...).
Maybe its just a sequence thing. Keep trying.
Mike
|