|
I picked up 5 of each at my local dealer and found that I had enough to replace all bulbs that were out on the 96 850GLT. I was not able to get the bulbs from any of my local parts stores. If all your bulbs are out I would get at least ten of the smaller (warning light) bulbs. Some of my bulbs started working after they were tightened. Also, I found that you can test the bulbs while installed with a continuity meter as they have two small openings on the back of the bulb case that you can make contact with. The instruction on Bay 13 for cluster removal are very good and if you take your time you should not have any problems.
Good Luck
Oliver
|