|
When inserting spark plugs, always start them by hand after putting antisieze on the threads. Just put the plug in the ratchet and turn the rachet by hand; you don't want to strip any threads. Hand tighten to stop, then add 1/2 turn with the wrench. Do not overtighten, please.
Same with the oil. Always screw the drain plug with, a new crush washer, in by hand. Tighten 1/2 turn with a wrench. And the oil filter doesn't need a gorilla to make it tight. If it is too snug, you will never get it off again.
Klaus
--
98 V70Rawd(108Kmi), 95 854T(88K mi), 75 164E(173K mi)
|