Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD S90-V90 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2008 S90-V90 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B6304S head gasket: go or no go? S90-V90

posted by  james_a_sousa on  Wed Feb 19 15:32 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 18:51 CST 2014
[RELATED]

Have you removed the head yet?

If so, examine the gasket to see how much it is squashed. Enough to overcome the dent?

Try to determine where, and why it failed

When the head gasket failed in our '95 854 parts of the head gasket had rotted away! Not to be found!

How much is a new gasket?

How fast can you obtain one? If the answer to this question is a very short period, I would pull the head and see what the old head gasket looks like.

Years ago, our old, high mileage, early 70s Chevy Suburban blew its head gasket, the head bolts were only finger tight - the head gasket looked great! Lesson learned - torque the heads on an old V-8!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B6304S head gasket: go or no go? [S90-V90]
posted by  vp965  on Wed Feb 19 14:45 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.