Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Water pump installation details- still searching for info 900 1993

Hi Bill,

Did you contact FCP about the poor casting of the Hepu water pump they supplied? I would expect them to make that right once they are notified.

I don't have any photos of a failed upper gasket. I can tell you that by the time I get tired of topping up the coolant as well as looking at the problem it gets quite ugly.

Reference to avoiding RTV on pump seals: I have done it more or less the same way for a very, very long time. That includes the use of silicone RTV in the way I described. I have a tendency to disregard warnings about things that I have done numerous times without consequences.

I haven't been able to send internal emails in the Brickboard for a very long time. If you would like to send some images I have an account that I consider insecure and only use occasionally just for things like this. I consider it my spam account since once an address is posted openly that is what I get the most of there:vguy240atyahoodotcom.

Randy
--
Any twenty minute job is just a broken bolt away from a three day ordeal






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Water pump installation details [900][1993]
posted by  B.B. subscriber  on Fri Jan 20 13:31 CST 2023 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.