Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Any tips on replacing shift lever to clevis bushing on '88 M47 transmission? 200 1988

posted by  planetman on  Fri Aug 25 14:48 CST 2023
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

Penetrating oil and patience.

You can try to use a butane pencil torch to heat cycle the set screw. Most hardware stores now carry them.

If there's enough of the set screw exposed, you might be able to get a pair of pliers or Vise-Grips on it to turn.

Worse case scenario is to use a screw extractor which usually requires drilling.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502
hiperformanceautoservice.com or oldvolvosonly.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Any tips on replacing shift lever to clevis bushing on '88 M47 transmission? [200][1988]
posted by  tbb2 subscriber  on Tue Aug 22 11:51 CST 2023 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.