Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2023 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Any tips on replacing shift lever to clevis bushing on '88 M47 transmission? 200 1988

posted by  tbb2 on  Mon Aug 28 14:37 CST 2023
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 16 18:57 CST 2014
[RELATED]

Thank you gentlemen,

Screw loose.

PB Blaster and several days
plus
tapping the Allen head socket in screw head w/ a small hammer
plus
applying loosen and tightening force on the ratchet
AND
the info that this was a 4mm not a 5/32" Allen socket. The 4mm did not fit at first but when I read that the screw head was 4mm I used a pick to scrape the insides and the 4mm fit. I'm guessing that applied more force and saved me stripping something.

Now I am waiting replacement bushing and can struggle with getting the pin out.
--
1988 244 DL; B230F; LH-2.2; Manual 5-speed (M47)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Any tips on replacing shift lever to clevis bushing on '88 M47 transmission? [200][1988]
posted by  tbb2 subscriber  on Tue Aug 22 11:51 CST 2023 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.