Hi folks,
I cleaned and re-assembled everything, and what happens is that when I tight the nut holding the wiper arm to the motor and start the motor, I can hear the impulse of the motor, but it is like the arm cannot move.
The motor works fine if I disconnect the arm.
I cannot understand what prevents the arm to make its movement, everything looks good, including the splines.
I wonder, it this supposed to have this play, or should it be pushed inside?
https://postimg.cc/G9kNsswB
More images, the arm looks absolutely fine, but clearly, something mechanic happens when the arm is in place, preventing the natural movement it is supposed to make.
https://postimg.cc/3dYqjJYt
https://postimg.cc/N27zhZ78
Thoughts?
Thank you!
|