Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2006 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Pulls to the left when breaking 900

posted by  Metallo on  Sun Mar 9 06:56 CST 2025
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Feb 29 21:03 CST 2012
[RELATED]

Hi Spook,

I am good, and I hope you are well too!

So, I have already cleaned those cones, I see no rubber, unless it solidified and looks like metal.
See this image below.

https://postimg.cc/WtT4xCj7

In the meantime, I have disassembled the driver side, this is what is left after 28 years.

https://postimg.cc/ftjRJj7X

Regarding the P/Ns: Control Arm Stay is 390.5mm

The genuine P/N of the bushings is: 1359599

The number printed on the new bushing is: 6819057 which should be the same as 1359599.

I really do not know what to think anymore.

Thank you,
Alex






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Pulls to the left when breaking [900]
posted by  Metallo  on Sat Dec 21 09:37 CST 2024 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.