Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2020 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rough Idle after Headgasket Change 200 1989

posted by  volvo245kit on  Fri Mar 17 06:05 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Apr 30 20:54 CST 2011
[RELATED]

Did you remove the intake manifold? If so then I would be sure to install a new gasket. You can check around the intake gasket area by spraying carb cleaner around the perimeter while the engine is idling. If the idle smoothes out when yiou do this and rpms increase then that's where the leak is. The carb cleaner won't hurt anything. Good Luck!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rough Idle after Headgasket Change [200][1989]
posted by  someone claiming to be Mike  on Tue Mar 14 03:10 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.