Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 Brake Junction Block 200 1985

posted by  someone claiming to be sorenson-jr on  Wed Aug 2 01:07 CST 2006 [RELATED]

Material compatibility is a good point. Viton and EPDM make sense for glycol based brake fluids, NOT SILICONE.

Why mess and guess with brakes? The correct O-ring is 1330797-0, probably just a day or two away from your local dealership parts counter.

Laharview, there's no way you'll find things clean and pretty in there. The O-ring isn't the problem, its the rust and glop, but just the same if you remove the crud and pits you'll want to have new O-rings.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 Brake Junction Block [200][1985]
posted by  laharview subscriber  on Mon Jul 31 16:38 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.