Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Electrical 200 1986

posted by  yama on  Mon Nov 6 12:22 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 25 05:26 CST 2013
[RELATED]

Its normal. Here's a similiar situation to illustrate why. Consider 2 equal value resistors connected in series and then to GND on one side and 12 Volts on the other. If you measure with a volt meter in the middle you will read 6V. If you remove the GND connection all points go to 12V. Without a GND connection no current flows hence no voltage drops. A voltmeter has very high input resistance and doesn't allow enough current to cause any noticable voltage drop.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Electrical [200][1986]
posted by  sfraser  on Mon Nov 6 09:11 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.