Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2018 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

E-code Instalation and Part #'s 200 1990

posted by  someone claiming to be Wolfman on  Wed Nov 29 02:03 CST 2006 [RELATED]

I'm spending some time in France and figured...why not pick up some OEM E-Codes? Got some with the two colored turn-signals on French ebay for about $130 and they are in fine condition, even if some of the inner adjustment plastic pieces need repair. Im wondering, what is the best way to make my American '90 244 accept the new headlights? I'm pretty sure its not just a plug and play operation, but I could be wrong and any advice would be helpful

Before I found these I was contemplating buying them at a dealership for big bucks and some folks here had helpful advice on part numbers and what not. They told me the numbers of the headlights and turn signals but were not sure about the # for the little plastic "eyebrows" that go on top of both. Since my lights came with these pieces already I figure someone might be interested so here they are:

Headlight Trim:

Left (1990)
1312634ch
1312738bl
JMP

Right (1990)
1312636ch
1312739bl
JMP

Turn Signal Trim:

Left (1987)
JMP6950
1307253

Right (1990)
JMP
1312637ch
1312741bl

Thanks for any ideas,
Jon






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New E-code Instalation and Part #'s [200][1990]
posted by  someone claiming to be Wolfman  on Wed Nov 29 02:03 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.