Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

TABS done 200 1991

Once again i am humbled by Brick board. Thanks to all for helping through a very seized Trailer arm bushing ordeal. I will send in the pics once bricksters tell me how. I have a couple of good pics. You can still see my blood in one of them. I had a major seized passenger side Rr bushing. Stripped my 1/2 x10'grade 5 all to s***. Bought me a grade 9 for the install. Reccomended. Big difference.
Ended up cutting a bushing and beating the crap out of it. I was relentless. It will not win. It put up a real good fight. Took an angle grinder, a dremel, a BFH and a 1/2" cold chisel but it finally bowed and fell out on the floor while I danced around the car. New shocks, new springs, new bushings..rides like a brick, what a difference.
Thanks to all and especially Erling for his website and link to making my own tool. Couldn't have done it without the tool.
--
91 Brick turning 400,000 this month






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 2 TABS done [200][1991]
posted by  Kenner  on Thu Nov 30 11:34 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.