Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

What needs to be in the essential trunk tool kit? 200 1990

posted by  someone claiming to be nigelb1 on  Tue Dec 19 11:30 CST 2006 [RELATED]

13 and 10 mm sockets definetely, ok, and the wrench i have never needed less than 10mm, and i would get 11mm and up, i think 22mm is the pulley if you do the timing belt.....wire cutters, phillips screwdriver (try to get a "craftsman professional" its thicker handle is great for leverage, check out a snap on tools catalogue and look at the mechanics beginner set for other ideas, spark plug socket too, for the socket wrenches -a 3" and 6" extension is a must and a universal joint adapter for the socket so you can get the back bolt of the a/c compressor loose for changing belts






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 What needs to be in the essential trunk tool kit? [200][1990]
posted by  ricefive subscriber  on Mon Dec 18 16:59 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.