Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B230 O.P. Switch is not NPT thread 200

uid 18083's pic
posted by  lucid on  Thu Feb 22 01:50 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]

If you get that brass part out without damaging the block threads, you'll need to replace it with something having a 14.0 x 1.5mm thread that seals with a crush washer, like many common European banjo bolts.
The 14mm crush washer is Bosch # 2 916 710 609.

The O.P. Switch thread was 1/4" NPT in the B21/23, but changed to the straight 14mm thread and seal washer on the B230.
--
Bruce Young
'93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New OOOH Crud! [200]
posted by  Jorrell  on Wed Feb 21 14:08 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.