Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2012 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ANSWER wet floorboard 700 1990

posted by  aleekat on  Mon Apr 30 11:01 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:19 CST 2014
[RELATED]

Yes, antifreeze in your floorboard is a safe bet that's its heater core. I recently did mine, american version. If you don't need heat, you can bypass the core. Under the hood, 2 hoses go into the firewall, disconnect them, and just connect(I used a 1/2" diameter copper pipe, about 3" long to bypass)
First it is a major job. I did mine over the weekend. Look here. You may have to reverse some things due to english version.

http://www.brickboard.com/FAQ/700-900/HeaterCoreReplacement.htm
--
Post Back. That's whats makes this forum work.

This post has been marked as an answer to the original question.

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED wet floorboard [700][1990]
posted by  90blue740  on Mon Apr 30 10:22 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.