Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2005 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Pittman Arm Removal 140-160

posted by  Niel on  Mon May 14 14:24 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 12:56 CST 2014
[RELATED]

Here in New Zealand you can buy a Pitman arm puller for cheap, similar to a ball joint puller but totally different (if that makes sense). It hooks around the arm like a cup and pushes on the center bolt.

For those that don't know, with any joint puller you are not supposed to screw it until the joint releases. You are supposed to torque it up, knock the joint on the side with a hammer, and repeat a few times. the puller simply applies a static force to seperate the joint while you knock it.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Pittman Arm Removal [140-160]
posted by  Serpent6 subscriber  on Mon May 14 07:43 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.