Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2008 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Intake manifold for Strombergs 140-160

posted by  Rhys on  Mon May 21 09:57 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Nov 20 10:22 CST 2012
[RELATED]

Everything will bolt right up fine, except the pivot bracket on the manifold. A little fiddling will make that fit too. Use the heat shields from the iron manifold on the aluminum one too. If you have a twin pipe iron manifold, like that from the FI engines, forget about the header. It will be more trouble than it is worth, and use that money to save for SU's.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Intake manifold for Strombergs [140-160]
posted by  Serpent6 subscriber  on Mon May 21 08:57 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.