Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2007 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B16 Water pump rebuild 444-544 1958

uid 9973's pic
posted by  CVOLVO on  Fri Aug 3 13:37 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 13 18:40 CST 2012
[RELATED]

Yes, but I decided to have it done professionally. It appears you would need a bearing remover and press and if any mistakes were made, the shaft might either leak or be too tight. I had my B16B water pump rebuilt in 2001 and it's still working fine today. Of course you must keep the bearings greased and be aware when they need a squirt or two. I can find and send the Volvo green book rebuild instructions if you feel up to it. BTW, back in 2001 the cost, including new bearings was only about $60 Canadian.
--
Cam a.k.a. CVOLVO.COM






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B16 Water pump rebuild [444-544][1958]
posted by  Old Kombi  on Fri Aug 3 06:57 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.