Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1996 960 - #2 & #6 cylinders not firing. 900 1996

posted by  poolman on  Mon Sep 24 15:02 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Dec 26 02:03 CST 2010
[RELATED]

Yes --the power stages are located on the front and back side of the intake manifold-you should have removed the power clips from these before trying to dislodge the manifold--bet you have pulled a wire or two from the one thats causing the problem-stage is probally good but the hook up is not as should be concerning the electrical connection






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1996 960 - #2 & #6 cylinders not firing. [900][1996]
posted by  kompis  on Mon Sep 24 03:53 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.