Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

!!!Bleeder Screw Removal Tip!!! 200

posted by  matt82dl on  Fri Oct 19 02:31 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 10:46 CST 2014
[RELATED]

Having broke off bleeder screw in the past, I tried something new this time. I did the usual soak with PBlaster, smacked it with a hammer. But this time I used my impact wrench on the lowest setting and at about 60 psi and the bleeder screws loosened up after a few pulses. Talk about saving hours of aggrevation and possibly new calipers!! Thought i'd pass it along!!

Matt

--
'90 245 224k, '93 945 184k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 !!!Bleeder Screw Removal Tip!!! [200]
posted by  matt82dl  on Fri Oct 19 02:31 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.