Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2003 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

separating front driveshaft from carrier 444-544 1958

posted by  planetman on  Mon Mar 10 14:56 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

Hello,

I made a removal tool by welding a large nut to an early transmission flange.

Screw a bolt into the nut and bolt the tool to the driveshaft flange with at least 2 bolts and drive the bolt in.

The tool was originally made to remove transmission and rear end flanges, but it will work to seperate the driveshaft half to remove the center support bearing.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90501






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New separating front driveshaft from carrier [444-544][1958]
posted by  Old Kombi  on Mon Mar 10 14:28 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.