Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Connecting the AMM with the Engine Running 200 1990

posted by  pageda on  Fri Mar 21 13:31 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:18 CST 2014
[RELATED]

You do NOT want to disconnect or reconnect the AMM with the engine running or key on. If the engine does not start with AMM connected but does run not connected it is the AMM.

If it runs with fuses 4 and 6 jumpered and not without the fuel pump relay is bad.
YOu should hear both fuel pumps running with the jumper on the fuses.
Pull a spark plug is it wet or dry?
Dan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New how do I bridge fuses 4,6 on the 1990 240 dl? [200][1990]
posted by  loki7  on Fri Mar 21 12:20 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.