Don't use an ammeter, use a DVOM. Here is a horsed up schematic:



I have not measured this, only looked at the drawing to determine how it works. I think it should be accurate but I can't garauntee it.

--
Mr. Shannon DeWolfe -- (I've taken to using Mr. because my name tends to mislead folks on the WWW. I am a 52 year old fat man

I would guess it has something to do with brake lights as Herb has said - cruise will not operate unless it gets a signal (or lack of a signal, not sure which) that the brake pedal is not being depressed. Have you checked fuses? For me it was a flaky ground in the hatch hinges that was the problem. Brake light worked when I checked them, then on the highway, the ground must have failed and I had no cruise - fooled me for awhile.

Ron
93 245
near Brantford, ON, Can

Mr. Zork,

Have you checked the Vacuum Valves ( pedal valves ). They may need to be adjusted or maybe def. They have an electrical connection that need to be tested also.

Good luck,

Ron J.

Do your brake lights work? If they don't the cruise won't either.

hello pat,
sometimes it can be the button switch. at times, i have to depress my 92 cc button switch several times to catch.

not sure if this is your problem, but it has been mine at times.

regards,
byron golden
86 245
92 245