Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

intake removal 900 1992

posted by  volvito on  Sun Sep 14 06:26 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 23 04:59 CST 2014
[RELATED]

One more tip. I figure you are removing the cylinder head. You need a 24 inch bar and 14 m/m impact socket. Anything else will not handle the pressure. If you have help you can tap with a hammer on the wrench on top of the head bolt as you apply torque to remove it. That may help to loosen a corroded bolt instead of snapping. You will be amazed how tight the bolts are.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New intake removal [900][1992]
posted by  rileyman  on Sat Sep 13 14:14 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.