Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

I drilled a hole in the center of a hockey puck. 200 1987

posted by  Volvo From Heck on  Fri Apr 24 03:31 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 20:56 CST 2014
[RELATED]

Spring compressors are really not necessary for the rear of a RWD Volvo. Jack up the car and support the body with jack stands--put the jack under the differential and lift it a little. Disconnect the upper shock mounts on both sides-then lower the jack under the diff just enough for the springs to fall (on 240's) away from the upper perch (on 140's which are bolted top and bottom let the spring hang at near no-load length and then unbolt the lower clamp-there will be nearly no pressure from the spring. The shims can be added above the upper mounts or below the spring-your choice. -- Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need a cheap ride height solution - sorry it's long [200][1987]
posted by  streetdreams  on Thu Apr 23 05:23 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.