Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Lower Radio Position 200 1988

posted by  Volvo From Heck on  Sat Jun 20 13:23 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 20:56 CST 2014
[RELATED]

When radios were mounted in the lower bin they were supported on each side and locked in place by a machine screw through a slot in each side of the bin. The mounting plate (a metal plate/bracket attached to the radio front) had legs extending into the bin on each side with a receptacle for the mounting screws. The exterior trim piece for the radio face then mounted over the mounting plate. Some radios had/have a built in side mount receptacle for the screws.--Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Lower Radio Position [200][1988]
posted by  arill.wiltker  on Fri Jun 19 10:38 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.