Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Pre-ABS 240 (dual-triangular) brake system... 200 1990

uid 18083's pic
posted by  lucid on  Fri Oct 9 02:40 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]


REAR MC reservoir chamber feeds Junction Block, which leads to:
•Right Rear
•Right Front LOWER cylinders
•Left Front LOWER cylinders

FRONT chamber feeds Junction Block, which leads to:
•Left Rear
•Left Front UPPER cylinders
•Right Front UPPER cylinders

Look for signs of fluid on the back side of each wheel, and at the switch screwed into the top of the Junction Block. Fluid leaking at the switch means internal seals failing in the block. (Normally there should be no fluid present at the switch itself.)

--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New isolating brake leak locations. 1990 245 [200][1990]
posted by  Ian A  on Wed Oct 7 08:35 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.