Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Lower A Arm Bushing (Rear of A arm) replacing. 200 1989

posted by  ChazzyD on  Fri Oct 9 06:09 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Apr 15 13:14 CST 2014
[RELATED]

All you need is a hammer, at least in Tennessee. Just be aware that poly bushings have their downsides. Poly gets suggested on this forum on a constant basis, but it is NOT to everyones liking and the downsides are never laid out when it is suggested. There is more than one reason that rubber is the OEM choice and NOT poly. Do your own research and decide for yourself before laying out the dough and doing all the work.
Charles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Lower A Arm Bushing (Rear of A arm) replacing. [200][1989]
posted by  NewMexico240 subscriber  on Wed Oct 7 12:54 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.