Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2011 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

new front dust sheilds to install, is hub removal a can of worms? 700 1990

posted by  ibs740 on  Sun Oct 11 13:25 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:01 CST 2014
[RELATED]

I would add one thing to Randy's posts. After you have re-installed the dust caps over the locknut (caps are a tight fit into the hub hole)put a bead of silicone or other good sealant around the edge. Prying them out usually creates small gaps. Cheap & very simple precaution against water infiltration.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New new front dust sheilds to install, is hub removal a can of worms? [700][1990]
posted by  DogsRGood subscriber  on Sat Oct 10 19:03 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.