Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Reverse the direction and put the nut back on there! 200

uid 12839's pic
posted by  Paul Driver of Inga on  Sun Oct 25 04:59 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 25 16:42 CST 2012
[RELATED]

Deep Breath,

Remove the other three nuts. Now reverse the racket and tighten the nut back on there. You must be able to reach the direction switch with a small punch or screwdriver tip. After you get it tight you should be able to remove the socket and the wrench

And next time use a 10mm racket wrench or stick with the 10mm wrench. PITA but only way to get those on and off.

Regards,

Paul






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New holy crap stuck rachet box wrench on fan what to do????????? [200]
posted by  someone claiming to be carowner  on Sun Oct 25 04:32 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.