Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2007 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Update on head issue.... 700

posted by  N7SC on  Fri Mar 19 14:16 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 7 14:12 CST 2013
[RELATED]

From the Volvo Green Book titled Section 2(21), Reconditioning Engine, page48:

"Exhaust valves on turbo engines are stellite coated and must not be machined. They can only be grouped [?] with lapping paste against valve seat. If stellite coating is removed valves will lose heat resistance."

But on page 5 of the same book, it says:

"IMPORTANT: Valves are stellite coated and must not be machined, only ground-in with paste against seat, according to method in op E 28, page 48."
Note that here they do not specify exhaust valves only.

Either all the valves are stellite coated or just the exhaust valves on the turbo engines. Due to the conflicting statements in the manual, I am not sure which.
--
1955 Human, Scott; 1991 745 Turbo, Brunhilde; 1990 745GL, Snuggle Bunny






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Unknown Water Loss!!! (still) [700]
posted by  gentleman5926  on Mon Mar 15 16:59 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.