Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

torque spec question 200 1992

uid 34776's pic
posted by  Ryan_R on  Sun Apr 25 15:39 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 24 13:46 CST 2013
[RELATED]



These nuts are kind of a one time use. They should be smooshed into an oval so that they won't back off. Get them from FCP groton or the dealership. I'd vote dealership... I wasn't pleased with the nuts from FCP. Too soft.

The flame trap lives between the #3 and #4 intake runners. There's a big hose running from it to the back side of the accordion intake hose, next to the throttle body.

Worth getting a copy of the Bentley 240 service manual! :-)

-Ryan
--

Athens, Ohio
1987 245 DL 324k, Dog-mobile, E-codes
1990 245 DL 137k M47, E-codes, GT Sway Bars, GT Braces, Dracos
1991 745 GL 304k, Regina, 23/21mm Turbo Sway Bars





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New torque spec question [200][1992]
posted by  gertie240  on Sun Apr 25 06:23 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.