Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear Windshield Wiper Motor 200 1988

posted by  vvpete on  Tue May 25 06:48 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jul 10 14:10 CST 2014
[RELATED]

Yes, that's the wiper motor. In order to install it, you need to snake it up into position then attach it to the armature.
It is a PITA to get up/out of there. Removing the tailgate lock motor gives more clearance.
After that, run the motor on the intermittent setting and unplug the connector when it comes to the rest position, (verify the wiper is in the rest position)then attach the nut and spindle on the shaft to the armature of the wiper assembly, then attach the bracket to the tailgate.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear Windshield Wiper Motor [200][1988]
posted by  Rich1978  on Tue May 25 05:37 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.