Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

front seatback improvement/restoration 200

uid 12839's pic
posted by  Paul Driver of Inga on  Mon Sep 6 04:07 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 25 16:42 CST 2012
[RELATED]

You just need a can of 3M 77 adhesive and a strong fabric. I used fiberglass cloth, you get it in the body repair section of a auto parts store. I have also read here where another BB'er used denim cloth. That would most likely give you the same strength and a softer surface. Did the seat rebuilt a couple of years ago with the fiberglass on both the seat back and a pup bottom seat cushion. 40K miles later the seat is still holding up quite well. Just spray the back of the cloth and let it get nice and tacky before you stick it to the seat foam.

Good Luck,

Paul






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New front seatback improvement/restoration [200]
posted by  Euroman  on Mon Sep 6 03:06 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.