Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Take a good look at fuse #6 and it's contacts... 200 1991

uid 18083's pic
posted by  lucid on  Wed Sep 22 09:47 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]

...It carries the whole load for both the Ignition and FI systems.

Failure to get an OBD code from either system suggests no F6 power at the respective CUs.

The pushbutton OB light is a separate ground. The LED always has +12V on one side from the ignition switch. The pushbutton grounds the other side, which is what the ECUs are supposed to do to flash codes. But it seems they are both out to lunch.

--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Car won't start - ignition trouble [200][1991]
posted by  dacis  on Wed Sep 22 09:36 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.