Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

In the middle of timing belt change and . . . 200

uid 18083's pic
posted by  lucid on  Sat Nov 6 11:29 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]

"When removing the outer (larger pulley, there was no key to maintain the pulley in place on the crankshaft."

There are no removable square keys.
The crank sprocket is keyed to the crankshaft with built-in key. The belt pulley has a slot that keys it to the "nib" on the front of the crank sprocket.

Crankshaft sprocket, with "nib" on front face that fits recess on back face of belt pulley.


Belt pulley showing slot/recess on back face that keys to the "nib" on front of crankshaft t-belt sprocket.



--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New In the middle of timing belt change and . . . [200]
posted by  darkdelta  on Sat Nov 6 09:48 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.