Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

blown engine? 200 1987

posted by  stevepenniman on  Tue Jan 11 11:30 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 2 14:22 CST 2014
[RELATED]

Have a look behind the cam pulley to see if the seal has popped out. This happened to me awhile back when on on the freeway. LOTS of oil onto the manifold at #1.

It can be temporarily fixed by taking off the cam belt cover for access, and siliconing the seal back in the best you can. Or just push it back in with a putty knife if you're stuck on the road somewhere and maybe it will hold for awhile. Have lot's of oil with you when driving where you need to go. You'll smell it if it pops out. I got home this way.

Steve






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED blown engine? [200][1987]
posted by  brickie49  on Tue Jan 11 01:50 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.