Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

if all u need do it replace the pan gasket 200 1989

posted by  trichard on  Thu May 5 17:02 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 05:52 CST 2014
[RELATED]

http://www.eeuroparts.com/Main/PartDetail.aspx?id=1378864

use this 3 piece gasket.
if you're careful and a bit creative you can do the job with the engine sitting right where it is. the pan bolts are not torqued on hard and you want to keep it that on the re install.

use a rachet and extension with appropriate sized sockets and a rachet wrench. some of the bolts are easier to get off with a wrench






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New moderate experience, but need to change oil pan gasket [200][1989]
posted by  GlynnG subscriber  on Thu May 5 16:02 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.