Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ANSWER Ox sensor 200 1989

posted by  matt82dl on  Mon Sep 5 20:29 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 10:46 CST 2014
[RELATED]

for sure poor gas mileage.... like really bad. Last time I replaced my 02 sensor I had lack of power while accelerating symptoms.

There are some really good diagnnostic instructions in the FAQ. Voltage between the signal wire and ground should fluctuate rapidly between .2 and .7

If you like to solder, I recommend using the bosch univeral fit 02 sensor and splice it into your existing harness. saves you $120.

check my posts within the last year for lots relating to 02 sensor diagnostics.

Matt
--
'90 245 266k, '93 945 248k

This post has been marked as an answer to the original question.

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED Ox sensor [200][1989]
posted by  w9kir  on Mon Sep 5 20:06 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.