Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No need to remove the fuel rail! 200

posted by  bblument on  Tue Nov 29 21:35 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Apr 10 07:04 CST 2012
[RELATED]

You don't need to mess around with the fuel rail at all.. leave it attached. You do need to remove two ground wires that, IIRC, require you to remove two bolts or nuts that are part of what holds the fuel rail on the manifold, but once those two wires are off, you can (and should) put the bolts or nuts back on.

Let us know how it goes.

Barry






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Found the hiss - Intake manfold gasket - Step by step to replace? [200]
posted by  Mark Lundell  on Wed Nov 23 11:59 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.