Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

In Tank Fuel Pump Purchasing / Install Advice Needed 200 1987

posted by  yama on  Tue Dec 6 19:28 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 25 05:26 CST 2013
[RELATED]

I did 3 intank pump jobs in the last month. For each job from Tasca I purchased a new bung nut, bung nut gasket, fuel sock, sealing sleeve, 7 mm return line fuel hose(1266500/9179420) and 12 mm main feed fuel hose(1312257). Also purchased some Gates 5/16" 30R10 submersible for the short intank hose. For the first job I used a NOS AC fuel pump made in the UK. The 2nd and 3rd I used a Delphi made in the US for 50 from Amazon. The Delphi pumps draw more current and are louder than the older AC pump. I can definetely tell there running.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New In Tank Fuel Pump Purchasing / Install Advice Needed [200][1987]
posted by  Sputnik94115  on Tue Dec 6 16:38 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.