Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to resolder/ flow relays? 200

posted by  1990Volvo240 on  Sun Feb 19 15:02 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 3 13:18 CST 2014
[RELATED]

I think you need at least at 35-40 watt iron.

You want to make sure you have a clean, good condition tip on your iron.

Tin the tip with solder, touch the tip to the trace for a few seconds and introduce new solder.

What you want when you are done is a trace of shiny solder.

Check the archives for any additional tips.

Travis






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How to resolder/ flow relays? [200]
posted by  jon_h  on Sun Feb 19 10:28 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.