Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bad batch of intake hoses at FCP? or ??? 200

posted by  DELOC on  Tue Jun 26 12:55 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Feb 28 12:14 CST 2014
[RELATED]

From what I see in your photos it would be fairly easy to make a fitting to fix this. If you have a friend with a lathe a fitting could be made of brass or aluminum. I see a piece of thick wall tubing of the appropriate diameter a couple inches long, threaded about 1/2 way, 2 nuts, some sealant and you should be in business. Good old Yankee ingenuity at work.
Deloc






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bad batch of intake hoses at FCP? or ??? [200]
posted by  keithostertag subscriber  on Mon Jun 25 12:02 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.