Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2012 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Heater Valve Blew.. again. Have doubts about the OEM Replacement 900 1995

posted by  Steve on  Thu Dec 6 20:18 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 07:16 CST 2014
[RELATED]

Just because the OEM valve is "all plastic" and "looks like" the ScanTech valve does not mean much. Plastic what? If it's cheap injection molded polystyrene, it may last a year. If it's glass filled reinforced polymer, it might last a decade. The material and forming specs make all the difference. Volvo does spend a lot of time on these and that's usually why the OEM parts last much longer. Take radiator and heater hoses as a good example: compare OEM with MTC. An aftemarket producer can always knock the parts off using the same dimensions but that's about all that is the same.
--
See the 700/900 "FAQ" at the menu bar top screen left side.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Heater Valve Blew.. again. Have doubts about the OEM Replacement [900][1995]
posted by  RepairmanJackal subscriber  on Wed Dec 5 21:27 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.