Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 No Start 200 1988

I am late to this party, but at this point have you done a compression test? What were the results?

You might try squirting about a tablespoon of oil into each cylinder and cranking it over to coat the walls. Then install a set of new plugs. Disconnect the injectors and give it a couple of shots of starting fluid. If it will fire on that, reconnect the injectors and see if it will start.

Good luck,
Randy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 No Start [200][1988]
posted by  88 245  on Thu Feb 14 17:30 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.