Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

92 240- where can i get the plastic trim molding around the inside door release? 200

posted by  scorron on  Fri Apr 26 08:26 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 7 21:10 CST 2014
[RELATED]

I don't know the part number, but I highly recommend checking with the dealer. 240 interior parts have become scarce and highly sought in the past several years - odds are, if the dealer has it, it is almost as cheap as eBay, without 20+ years of use.

If you are looking for tan/beige, almost any of them you find will be brittle. I would recommend, instead, that you find black or blue door handle surrounds and buy a can of SEM Color-Coat in the 'camel' shade. It is a close match to the originals, and if you do all 4 doors, it will look good. The appearance of the 'camel' paint can be improved with their gloss clear topcoat to match the original sheen.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 92 240- where can i get the plastic trim molding around the inside door release? [200]
posted by  someone claiming to be oldduke  on Thu Apr 25 20:24 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.