Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2006 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

700 and 900 e-code swap photos 900 1993

posted by  dinomartino on  Sun Jun 30 14:12 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 04:43 CST 2014
[RELATED]

finally did the e-code install to my 945 yesterday. Went pretty smoothly, and am quite pleased with the results. RepairmanJackal's thread
Convert US-Spec w/o Fogs to E-Code? has tons of good info on the process and the parts needed, I'm sharing my photos in the hope that they will supplement the existing info and encourage others to perform this upgrade.

only snag I had was with the corner lamp bulb holders. Neither the US market 940 ones nor some later ones (from a 960? and 850? who knows) would fit the european housings. I ended up wrapping electrical tape around the sockets to buld them up enough so the ears would do their job and hold the socket to the housing when rotated.

photobucket album (set to public, please advise if you have difficulties!) here: Volvo 945 e-code install

John
--
1989 245 245K / 1993 945 131K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 700 and 900 e-code swap photos [900][1993]
posted by  dinomartino subscriber  on Sun Jun 30 14:12 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.